[Elecraft] K2 - IF shift

Tue Apr 13 09:52:00 2004

Hi

You can emulate an IF shift by setting all four SSB filters to OP1 and =
then varying the BFO settings on each. FL1 is used on transmit so it =
must be set up as in the manual or with spectrogram. FL2 should be set =
for a normal bandpass if you want it different than FL1 although FL1 =
will usually be ok for receive as your normal setting. in that case you =
can also shift FL2.  then you can shift FL3 up and FL4 down a little.

Don Brown
KD5NDB
  ----- Original Message -----=20
  From: js<mailto:[email protected]>=20
  To: [email protected]<mailto:[email protected]>=20
  Sent: Tuesday, April 13, 2004 8:38 AM
  Subject: Re: [Elecraft] K2 - IF shift

  Hi Group,

  I should clarify my question below is related to operation in SSB =
mode.

  73

  Johnny Siu VR2XMC
  s/n 1146, 3837, 4165
    ----- Original Message -----=20
    From: js=20
    To: [email protected]<mailto:[email protected]>=20
    Sent: Tuesday, April 13, 2004 5:02 PM
    Subject: [Elecraft] K2 - IF shift

    Hi Group,

    Like everyone here, I like my K2 very much.  However, with =
IC756pro2, I can easily use twin PBT and IF shift to fight against QRM.

    In our K2, could any of you advise how I can achieve 'IF shift' =
function to fight against QRM.  If not, is there any other alternative?

    73

    Johnny Siu VR2XMC

  --- StripMime Report -- processed MIME parts ---
  multipart/alternative
    text/plain (text body -- kept)
    text/html
  The reason this message is shown is because the post was in HTML
  or had an attachment.  Attachments are not allowed.  To learn how
  to post in Plain-Text go to: =
http://www.expita.com/nomime.html<http://www.expita.com/nomime.html>  =
---
  _______________________________________________
  Elecraft mailing list: =
[email protected]<mailto:[email protected]>
  You must be subscribed to post to the list.
  To subscribe or unsubscribe see: =
http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/m=
ailman/listinfo/elecraft>
  Elecraft Web Page: http://www.elecraft.com<http://www.elecraft.com/>
  Also see: =
http://www.elecraft.com/elecraft_list_guidelines.htm<http://www.elecraft.=
com/elecraft_list_guidelines.htm>

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---