[Elecraft] Building KPA100 & upgrades?

[Don Wilhelm]

Folks,  I already responded to Tom separately, so...

Yes, I have input - the KPA100 circuit changes involve only 5 new resistors
and elimination of L18 (other changes are just jumpers).  It is much easier
to make these changes before buttoning things up (the KPA100 circuit baord
removal is not trivial), so I would recommend doing the changes before
assembling the board to the heat sink.

But, a CAUTION - the builder will have to 'keep his head on straight' while
doing the original construction and the mods at the same time, and debugging
the result.  Each person will have to determine whether he/she can keep it
straight - if not, then be safe and do each separately.

73,
Don W3FPR

----- Original Message ----- 

> Anyone else have some input on this?
>