[Elecraft] Microphone cable problem

Sat Sep 20 20:20:01 2003

I don't think you have a broken wire...there are 2 mic elements in the
K2 mic and only the one electret is hooked up.

Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075
Politics is the art of appearing candid and completely open, while
concealing as much as possible.   -States: The Bene Gesserit View

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Eric Wosten
Sent: Saturday, September 20, 2003 7:08 PM
To: [email protected]
Subject: [Elecraft] Microphone cable problem

Hi folks,

I use a original Heil Elecraft mike on my K2 and it sounds fine.

Since yesterday I had trouble keying the K2 with the pushbutton on the
mike.

So dissasembled it and put a little bit of Deoxit on the switch contacts
but
it didn't help.

As it turns out I have a open wire in the mic cable (the black one) and
started to slice the cable a few inches seen from the mike in the
direction 
of the spiral.

But still didn't find the spot where it is not OK.

Just wondering if I've got myself a first ?

Oh well,

73 Eric PA3CEV

K2#960

_______________________________________________
Elecraft mailing list: [email protected]
You must be subscribed to post to the list.
To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
Also see: http://www.elecraft.com/elecraft_list_guidelines.htm