[Elecraft] K2 C72 , C174, C210

Tue Oct 28 20:48:08 2003

Thanks, Frank.  Yes, I meant C71  -- typo on my part.   I just checked a few=
 caps of known value and they all check out fine.  I'm really confused about=
 these 820 marked jobs.

73 -- Carl, N8VZ
-- 
Carl J. Denbow, [email protected] on 10/28/2003

On Tue, 28 Oct 2003 17:05:01 -0800, W6NEK wrote:
>=A0Hello Carl,
>=A0C71, C174 and C210 are 82 pf NPO caps marked "82" or "820". The
>=A0Elecraft partnumber is E530038. =A0You mention C72 did you really
>=A0mean C71? I Don't know why you cap meter is measuring .218nf.
>=A0Since all three 82 pf caps are measuring .218nf then I would
>=A0suspect somthing wrong with the meter connection, calibration,
>=A0internal supply, or somthing along that line.
>
>=A0Hope this helps,
>=A0Frank - W6NEK
>
>
>=A0----- Original Message -----
>=A0From: "Carl J. Denbow" <[email protected]>
>=A0To: "Elecraft Reflector" <[email protected]>
>=A0Sent: Tuesday, October 28, 2003 4:04 PM
>=A0Subject: Re: [Elecraft] K2 C72 , C174, C210
>
>
>=A0I'm just getting back to my K2 construction project after several
>=A0months of "down time." =A0Right off the bat, I've run into a problem.
>=A0 I can't find the above named capacitors. =A0I have found three small
>=A0tan colored caps marked 820, but when I check them with my cap
>=A0meter they all check out as .218nf. Something is wrong here. =A0Any
>=A0help would be appreciated. =A0Thanks.
>
>=A073
>
>
>=A0Carl -- N8VZ
>
>
>=A0P.S. =A0The other side of the caps are marked "K1J" -- if that means
>=A0anything.
>
>
>=A0_______________________________________________
>=A0Elecraft mailing list: [email protected]
>=A0You must be subscribed to post to the list.
>=A0To subscribe or unsubscribe see:
>=A0http://mailman.qth.net/mailman/listinfo/elecraft
>=A0Elecraft Web Page: http://www.elecraft.com
>=A0Also see: http://www.elecraft.com/elecraft_list_guidelines.htm