[Elecraft] XV 222

Wed Oct 22 00:19:01 2003

Oops, I see my mistake. I was looking at the wrong part. Yes, the change =
in
the reference designator was not made in the manual. Z6 is still used. =
It is
a capacitor on some bands and an inductor on others.=20

There definitely should be an errata inserted in those kits until the =
manual
is revised saying that Z6=3DL19 on the 222 and Z6 is whatever reference
designator was used for the other bands.=20

Ron AC7AC

-----Original Message-----
From: Robert Friess [mailto:[email protected]]=20
Sent: Tuesday, October 21, 2003 8:57 PM
To: Calvin Starr; [email protected]; [email protected]
Subject: Re: [Elecraft] XV 222

Hi Calvin,

I think you are talking about the inductor that is in series with the
crystal and, if so, it should be identified as L19.  I am copying this
message to Ron, AC7AC, who wrote the manual from my input.  We may have
gotten or wires crossed.  Maybe Ron can confirm my suspicion.

73,
Bob, N6CM

----- Original Message -----=20
From: "Calvin Starr" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 21, 2003 8:11 PM
Subject: [Elecraft] XV 222

> I am building an XV222 transverter and have gotten to page 49.  There=20
> is a
red inductor to be
> mounted at Z6 which I can not find on the board.  This is supposed to=20
> be
near the crystal Y1.
> Has anyone had this problem or did you find the location for Z6?
>
> Thanks
> Calvin KR5E
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm
>
>