[Elecraft] K2 RIT-SPLIT LED Mod - PAGE 4

[Tom Hammond]

Hi Folks:

I've received a couple requests from builders who are considering adding 
the RIT-SPLIT mod to their K2, but who don't have facilities to make their 
own PC boards... at least by etching them.

I have added a fourth page to the PDF on my web site. This page illustrates 
a PC board which can be fabricated manually, using either a DremelTool 
(with cut-off wheel) or by CAREFULLY using a knife to cut (or route out) 
the spaces between the lands.

I have ALSO added a SINGLE FILE to the web site (just below the big file) 
which contains only page 4. This file is only 30K in size.

If you have already downloaded the big PDF file, please don't bother 
re-downloading it, just download the individual 4th page.

As always, you may access my web page at:

   http://home.earthlink.net/~n0ss

Once there, drop down to the bottom of the page and click on the DOWNLOAD 
PAGE link to get the files.

Finally, if there's a great hew and cry for PC boards, I might be cajoled 
into etching up one (single) batch of maybe 50-100 boards. Especially if 
YOU can drill your own holes. Neither the bucks nor the demand are there to 
make it worth too much of an effort, I'm afraid, but a limited batch might 
be do-able.

73,

Tom   N0SS