[Elecraft] KPA100

Wed Oct 8 19:40:02 2003

It should be a real high resistance as this is the external PA keying
FET.  Book calls for greater than 10,000 ohms..so if you are reading meg
ohms you should be okay.  This is an output from the rig and won't
affect anything unless you try to key an external amp with it.  Sounds
like you're ready to connect the B+.

Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075
Politics is the art of appearing candid and completely open, while
concealing as much as possible.   -States: The Bene Gesserit View

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Lou Roux
Sent: Wednesday, October 08, 2003 4:00 PM
To: [email protected]
Subject: [Elecraft] KPA100

Hi fellow Elecrafters,

I'm just completing my KPA100 and ran into a problem with the resistance
checks on page 41. Everything checks out except I get no reading on the
Q9
tab.
Any ideas why this might be?

Thanks,

Lou - W6UR

_______________________________________________
Elecraft mailing list: [email protected]
You must be subscribed to post to the list.
To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
Also see: http://www.elecraft.com/elecraft_list_guidelines.htm