[Elecraft] Re: AH-4 + solder question

[DAVE HEALY]

Thanks to all who responded to my solder question and using the ICOM =
AH-4 with the K2.

I ordered some 2% silver solder today plus the Panavise, Weller 700 =
degree soldering station, Mag light, cutters, good needle nose pliers, =
etc, etc.  You know, if I already had all that stuff like you guys do, I =
could have ordered a K2 with all the bells!  Next time, yes?.

Found a great little circuit and the pin-out of the AH4 that allows it =
to be used with any rig, so we'll see.

Comforting to have so many replies to my simple questions.  My =
confidence is building knowing there is a place to turn if the K2 =
doesn't pass the smoke test.

Thanks again es 73,

-dave- N7DKK  Medford, Oregon

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---