FW: [Elecraft] Keying interface for K1/K2

[Dan Barker]

Correction.

<snip>You connect both the CW keying line from the PC to the K2 keyer jack,
and
connect each side of the keyer paddle through a diode to the proper jack
contact.</snip>

should be: You connect both the CW keying line from the PC to the K2 keyer
jack, and
connect the keyer paddle normally. Both sides of the keyer jack go to the PC
key line
through a diode.

Dan / WG4S / K2 #2456

ps: My K2 has a stereo 1/8 splitter. The paddle plug into one side, and the
straight key to the other. The two diodes are crammed into the plug shell on
the straight key wire. Works FB.