[Elecraft] K2 ATU

[john FRANCIS]

Wonder if anyone has had encounted a similar problem as this.   Finding =
it difficult to install J4 on the ATU Control Board.  This runs =
alongside the 40 pin socket for U1.  Between this socket and J4 are two =
capacitors C60 and C45. These tend to "foul" J4 causing it to deflict =
from the perpendicular towards the BNC socket J2.  I have  mounted C60 =
and C45 close to the board.  Am wondering  if it would be OK  if I  =
replaced then with two new capacitors on longer "legs" to clear the side =
of the U1 socket.  Appreciate any suggestions, or solutions.

Many thanks  John Francis  G3LWI


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---