[Elecraft] K2DSP

Sun May 25 14:23:07 2003

The KDSP2 hasn't been around long enough for the clock to slow down yet :-)
73, Bob N6WG

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Lyle Johnson
Sent: Sunday, May 25, 2003 7:45 AM
To: Elecraft
Subject: RE: [Elecraft] K2DSP

Hello Mike!

> My question is this: Since the K2DSP is (by necessity) menu
> driven I've wondered how quickly one can adjust the settings
> having to access various menus.

The most commonly adjusted functions are available by 1 or 2 button presses:

ONE BUTTON

Press AFIL to sequence through the four filter settings you have set up for
the current mode. In CW, for example,  this is usually a series of filters
at the same center frequency, but varying width.

TWO BUTTON

1) Tap DISPLAY to bring up the KDSP2 menu

2) The KDSP2 main menu for CW will let you then toggle noise reduction on
and off (tap BAND+), toggle between hard and soft filter shapes (tap BAND-)
or adjust the amount of noise reduction (PRESS STORE).

The KDSP2 main menu for SSB will let you toggle noise reduction on and off
(tap BAND+), toggle the autonotch on and off (tap BAND-) or adjust the
amount of noise reduction (PRESS STORE).

The main menu for RTTY lets you adjust filter center frequency and width
since notch and noise reduction are not available in this mode.

***

More esoteric settings, like denoiser beta and decay, are buried a few menus
deeper.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com