[Elecraft] dsp problem?

Thu May 22 13:14:13 2003

This is not normal.  The description of the sound is as if you have the AGC
turned off and are receiving a really loud signal.  Try backing down the RF
gain cotnrol.  If that clears it up, you may have an AGC problem.

-Lyle

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of
> [email protected]
> Sent: Thursday, May 22, 2003 9:42 AM
> To: [email protected]
> Subject: [Elecraft] dsp problem?
>
>
> Maybe I have a problem with my dsp unit. Even at the 1 level of
> noise reduction the audio sounds tinny and it will make the built
> in speaker shriek. Turning the audio to min helps but it seems to
> overload with more volume added to hear the weak ones. This is on
> ssb. I'm sorry but with my unit I have a harder time
> understanding the audio. On cw it is much better and distortion
> does not make too much difference. It seems to me the lowest
> level of noise reduction is too much. And I intend to play with
> the settings and the gain. It may be my agc because I have it set
> at a more aggressive level (3.5v). I will have to ask Eric about
> this. Everything seems to function properly. I like the ssb
> filters, without noise reduction they are better than the crystal
> filter. With dsp filters in the noise is cut way down to start. I
> will only use noise reduction when I have to.
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>