[Elecraft] Re: SSB Module - no cw on transmit - Help Please

[John Petters G3YPZ]

Hi Ingo
> Sounds like the controller on the main board "don't see" the module. My
> suggestion is to check the solder joints (unsoldered or cold solder
joints)
> at the module on J11.

Found the fault. Got RP3 & RP5 mixed up. Swopped thenm and it is now
working, but low gain on rx . Tried rewinding the two toroids and that seems
to have improved matters. Worked PY on 10M and OD5 on 15 with about 10 watts
as well as some Gs on 160. Looking good.
73
John Petters
www.traditional-jazz.com
Amateur Radio Station G3YPZ