[Elecraft] K2 Temp.-Comp. PLL REF. Upgrade

Sat May 10 20:50:01 2003

It is referring to the PLL xtal...only one is needed..the early versions had
2.  The X3 thru 11 are the xtal filter and yes you still need to install
those.  That is done in a later step.....just install the new xtal with the
CD for the PLL and later you will install the filter xtals 3 thru 11.

Gregg R. Lengling, W9DHI, Retired
K2/100 SN 3075
http://www.milwaukeehdtv.org

----- Original Message ----- 
From: "Charles" <[email protected]>
To: <[email protected]>
Sent: Saturday, May 10, 2003 7:42 PM
Subject: [Elecraft] K2 Temp.-Comp. PLL REF. Upgrade

Hi all,
I am building the K2 RF board, I have the K2 Temp.-Comp. PLL REF. Upgrade
and am confused on the instructions about "Only one crystal is now needed."
The confusion is because the step in the K2 manual referred to in the mod
(page 50 first step) lists X1 through X11.  Do I still install X3 through
X11 or not??
Maybe I should have studied English better in school, but I didn't so I
could use your advise again.
Many thanks.
73 de KC9DAO, Charles
^
^

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com