[Elecraft] K1 - 4 Problem

[Steve]

Don't panic you're OK!  There is a menu item to set the bands being used. 
See band assignments page 39 of the main K1 manual.

73,

Steve - W8HF
K1 #1520





--On Tuesday, May 06, 2003 6:40 PM -0400 WQ8Q <wq8q@earthlink.net> wrote:

> Okay, got to the point where I've powered everything up for the Initial
> Alignment & Test and everything reads like it should and the tuning knob
> does what it's supposed to, etc . . .
>
> However:  When I check the BANDS (B1-4) to see what I have, instead of
> having  7, 10, 14, 21
>
> I have 7, 14, 18, 21
>
> Now, I've checked the Crystals in the KFL1-4 three times to see if they're
> in the right spots,
> Reading right off the board:  X1 - 29.00  X2 - 22.00  X3 - 18.100  X4 -
> 15.00
> And the two extras I've got are : 26.05 and 18.00
>
> . . can't find anything else in the manual, so I'm stumped!!
>
> Any help would be greatly appreciated . . .
>
> 73 de Rick, WQ8Q
>
>
>
>
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com