[Elecraft] New K2 Options

[Doug Faunt N6TQS +1-510-655-8604]

Somebody got it wrong.  The currently announced units are 6M, 2M and
1.25M.  The 70cm unit will be along later, since all three of the
above use the same pattern PC board, and 70cm will be different.

IIRC, the power out is 15 or 20W on each band, and they will work well
with the K2/100 (although you can fry one if you aren't a litlle
careful).
They should also work with other rigs, too.

73, doug

   From: "Roy" <marion@montana.com>
   Date: Mon, 3 May 2004 08:21:36 -0700


   ----- Original Message -----
   From: <k6se@juno.com>
   To: <elecraft@mailman.qth.net>
   Sent: Friday, May 02, 2003 10:46 PM
   Subject: [Elecraft] New K2 Options


   > Hi, All,
   >
   >> 3, 4 and 5) Three transverters - one or 2 meters, one for 1-1/4 meters,
   > and one for 70 centimeters.  The transverters output 20 to 25 watts of
   > transmit power and have very good receive noise figures.  The K2's
   > frequency readout displays the actual VHF/UHF frequency you are tuned to.
   > >
   (sigh) no six meters? Thats the one I was waiting for. Oh well, Back to the
   ICOM. Roy AB7CE

   _______________________________________________
   Elecraft mailing list: Elecraft@mailman.qth.net
   You must be a list member to post to the list. 
   Postings must be plain text (no HTML or attachments). 
   See: http://mailman.qth.net/mailman/listinfo/elecraft
   Elecraft Web Page: http://www.elecraft.com