[Elecraft] new DSP option

Sun May 4 19:00:06 2003

The DSP software will be open-source, linked to proprietary Elecraft
software modules for the interface, so anyone can develope DSP code
for the module.

73, doug

   From: [email protected]
   Date: Sat, 3 May 2003 06:21:13 -0700

   "Andy Bullington" <[email protected]> writes:

   "This is an exciting development. Any more detailed info on this option?"
   ==========
   The only other thing I remember about the DSP option is that it consists
   of two small PC boards.  One of them you assemble like any other Elecraft
   kit and the other (slightly smaller) board is preassembled because of the
   impossibility of the builder being able to solder the leads of the
   components to the board without creating hundreds of solder bridges (the
   many leads on the microprocessor IC are spaced extremely close to each
   other, for instance).  The two boards plug directly together, and plug
   onto the K2's RF board as a unit.

   You'l have to wait until Elecraft posts the information on their Web site
   for any more detailed info on this option or on any other of the new
   options.

   73, de Earl, K6SE
   _______________________________________________
   Elecraft mailing list: [email protected]
   You must be a list member to post to the list. 
   Postings must be plain text (no HTML or attachments). 
   See: http://mailman.qth.net/mailman/listinfo/elecraft
   Elecraft Web Page: http://www.elecraft.com