[Elecraft] troubleshooting

Mike Harris [email protected]
Thu Mar 27 08:37:05 2003


G'day,

> 1]When  I plugged the SSB board back in, all appeared to be OK , and
> the big plug and one little one WERE OK, but the other little plug's
> pins were beside its socket, not in it. The receiver signal path
goes
> right thru the SSB board. No connections, no signal path.

A good visual check on this one is to make sure the hole in the middle
of the module lines up centrally with the yellow test point.

Regards,

Mike VP8NO