[Elecraft] Could the KAT100 be autonomous ?

Wed Mar 26 20:52:00 2003

If you should decide to go with the SGC-239, I highly recommend that you
either buy or build SGC's SMARTLOCK.  It is a very small remote control box
for the 239.  I built mine for just a few dollars.  Without the SMARTLOCK I
was never sure of the 239's current status.  Did it tune, did it tune
properly, was it even powered on?  My tuner is mounted outside under the
roof overhang and can not be seen or heard from the shack.  The SMARTLOCK's
schematic is in the 239's manual.

John   K7SVV

----- Original Message -----
From: "Martin AC6RM" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, March 26, 2003 3:29 PM
Subject: [Elecraft] Could the KAT100 be autonomous ?

> http://www.sgcworld.com/shopsite_sc/store/html/store.htm
>
> I haven't used this product, but I'm seriously considering one.  It seems
> to have more sensorial perception than the LDG product (actually detects
> frequency and phase as well as SWR).  Plus it's cheaper.  In the mean time
> I dash out to the MFJ941E after I hit the tune button.
>
> 73, Martin AC6RM (k2#3021)
>
> -snip-
> Could KAT100 be used without the I/O cable ?
> -snip-
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com