[Elecraft] additional info: #26 and #28 enamel wire spools

[David B. Perrin]

Hi-
 Sometimes I miss the reflector replies, sorry.
To those wanting more info:
..
The wire spools are Elektrisola wire.  Check out:
http://www.elektrisola.com/
..
The red #26 is number P155 on the web page
The gold #28 is number PN155 on the web page
..
Both wires solder well without first stripping the insulation. See web
page.
The wires strip, if you feel the need,  easily if heat with a small
soldering iron first.
The insulation does strip easily  with a knife without heat as well.
..
Ooh, I wish I had access to this wire when I built my K2 (#1871) and 3
LDG auto tuners.
73 de Dave in NH
.....
Original post:

Hi:
-I have two large spools of enameled solid copper magnet wire.
-Each spool is about 6.25 inches in diameter and 6.25 inches in height.
-Both are full within 3/8 inch of the edge. (i.e. they are 99% or more
full)
     #26 spool weighs  8.25 pounds, is red enamel. At about 1250 feet
per pound that would be roughly 10,000 feet.
    #28 spool weighs 10 pounds, is gold enamel. At about 2000 feet per
pound that would be about 20,000 feet.

Looking for a reasonable offer...need more info?
73 de Dave in NH