[Elecraft] K2 low AGC threhold

[John Huffman]

> John Posted:
> 
> I adjusted R1 until the noise was just the same in and out, but verified
> that with AGC in, strong stations were suppressed.  The correct setting
> for
> me was with R1 at less than half the maximum.
> 
> 
> Say John Out of curiosity (BTW I got 3.84 volts as well) what voltage
> did you end up with after you redid the threshold setting?
> 
> Dave WB9SOG (SN #3231)

Dave -

I get 3.458V with this setting of R1.

73 de NA8M
John