I am just starting transmit tests on a new K2 Version B(3062). In tune or
keyed CW the transmit output goes full scale or about 15 watts at 5 A. I
have RF power control set to minimum. U8 pin 2 (VPWR) is 0 volts so this
should be driving power down. Visual checks look OK. Any ideas?
<>-< <>-< <>-< <>-< <>-< <>-<
Ron Schuster (N9RC)
Cincinnati, OH
[email protected]
<>-< <>-< <>-< <>-< <>-< <>-<