[Elecraft] KSB2

[Don Wilhelm]

David,
Check the board layout diagram in the KSB2 manual.  There is not enough
clear space to silk screen all the component designations on the board, so
you have to look at the board diagram to determine the placement.  This is
only true in the area of the filter - the component stuffing gets mighty
tight there.

73,
Don W3FPR

----- Original Message -----

On the KSB2... Page 7 of the instructions... second install point down says
"install  short wire jumpers at CD and CL..."  Where is CD and CL.... no
markings on the board for these points?

Can anyone help out here?