[Elecraft] Low Power Output on K2

[Lynn & Cherie Hammond]

Signal tracing with a different RF probe, I find good VFO output from U3
pin 6, and on pin 6 of U10 (transmit mixer). No BFO signal on pin 1 of
U10 in xmit mode. No BFO signal on source of Q24. No signal on the gate.
Lots of signal on the other side of D37. Unless that diode is dead, am I
correct that it isnt switching because of a lack of bias voltage on xmit
- and where do I go from there??

73 Lynn KL7IKV