[Elecraft] [K2] VCO Alignment problem

Tue Mar 4 15:24:01 2003

Hi

I had this problem with a >3000 K2 a few days ago. After quite a bit of head
scratching I rewound T5 and added two turns. This solved the problem and all
of the voltages fell into place. You may want to give this a try.

Don Brown
KD5NDB

----- Original Message -----
From: "Jibeji" <[email protected]>
To: <[email protected]>
Sent: Tuesday, March 04, 2003 12:39 PM
Subject: [Elecraft] [K2] VCO Alignment problem

Hello.
I have a problem on page 58, VCO Aligment.
The voltage on R30 should be 6.0V but I have 4.85V max when I turn L30 CW.
C72 is 271, L30 is T1005, T5 is a yellow toroid, 16 turns of red wire (pads
1&2), 4 turns of green (3&4)
Any idea ?
Thanks
--
F8DQL
UFT 1116

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com