[Elecraft] Last Call for Dump & Save Testers - long posting

[Tony Wells]

Folks,

As promised, the first release of the K2 Dump & Save will be ready for beta
testing in the next 2-3 days.

I have some volunteer testers, who have kindly agreed to check the software
out, but more testers would be handy - the more the better - this will help
minimise 'glitches' when the software goes into general release.

You don't have to be a software expert, but knowing your K2 well would be an
advantage!  AND - you get your name in the credits!!!

To hopefully encourage a few more volunteers, I've pasted below the output
from the current test version of my K2 parameters. There is still some work
to do, like reporting on the frequency memories, but things are progressing
quite quickly now.

I'm sure you can see how handy it is.

If you want to volunteer plezase email me directly - it should take about 10
minutes or so to test the output of the program against your K2 settings,
and hopefully identify anything I have got wrong, or forgot!

Regards

Tony
M3CJF
G7IGG

Report from current version of the program below

Tony's K2 #3028 as of: 04/Mar/2003 00:11:14
------------------------------------------------

SPLIT WORKING IS SET "PER BAND"

Menu Tune Rate Type______: 3C (10/20/1000 Hz)
RIT/XIT Offset___________: 0


Band Setting for: 160m 1.8MHz
-----------------------------
*** Note, split working is set "per band" AND ACTIVE on this band.

VFO A (RX)_______________: 1860.00
VFO B (TX)_______________: 1860.20
Mode_____________________: CW
AGC speed________________: SLOW
AGC On/Off_______________: ON
RX Ant. selected_________: ON
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 10Hz
XFIL 1___________________: 2500
XFIL 2___________________: 700
XFIL 3___________________: 400
XFIL 4___________________: 100


Band Setting for: 80m 3.5MHz
----------------------------
*** Note, split working is set "per band" AND ACTIVE on this band.

VFO A (RX)_______________: 3622.48
VFO B (TX)_______________: 3623.62
Mode_____________________: LSB
AGC speed________________: SLOW
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 2
Pre-amp selected_________: OFF
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 10Hz
XFIL 1___________________: 2500
XFIL 2___________________: 2500
XFIL 3___________________: 1800
XFIL 4___________________: 1600


Band Setting for: 40m 7MHz
--------------------------
*** Note, split working is set "per band" but not active on this band.

VFO A____________________: 7005.94
VFO B____________________: 7003.42
Mode_____________________: CW
AGC speed________________: SLOW
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 1000Hz
XFIL 1___________________: 2500
XFIL 2___________________: 700
XFIL 3___________________: 400
XFIL 4___________________: 100


Band Setting for: 30m 10MHz
---------------------------
*** Note, split working is set "per band" but not active on this band.

VFO A____________________: 10164.97
VFO B____________________: 10106.00
Mode_____________________: LSB
AGC speed________________: FAST
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: OFF
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 10Hz
XFIL 1___________________: 2500
XFIL 2___________________: 2500
XFIL 3___________________: 1800
XFIL 4___________________: 1600


Band Setting for: 20m 14MHz
---------------------------
*** Note, split working is set "per band" but not active on this band.

VFO A____________________: 14367.56
VFO B____________________: 14060.26
Mode_____________________: USB
AGC speed________________: FAST
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 20Hz
XFIL 1___________________: 2500
XFIL 2___________________: 2500
XFIL 3___________________: 1800
XFIL 4___________________: 1600


Band Setting for: 17m 18MHz
---------------------------
*** Note, split working is set "per band" but not active on this band.

VFO A____________________: 18159.34
VFO B____________________: 18096.00
Mode_____________________: LSB
AGC speed________________: FAST
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 10Hz
XFIL 1___________________: 2500
XFIL 2___________________: 2500
XFIL 3___________________: 1800
XFIL 4___________________: 1600


Band Setting for: 15m 21MHz
---------------------------
*** Note, split working is set "per band" but not active on this band.

VFO A____________________: 20994.20
VFO B____________________: 21505.60
Mode_____________________: LSB
AGC speed________________: FAST
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 20Hz
XFIL 1___________________: 2500
XFIL 2___________________: 2500
XFIL 3___________________: 1800
XFIL 4___________________: 1600


Band Setting for: 12m 24MHz
---------------------------
*** Note, split working is set "per band" but not active on this band.

VFO A____________________: 24929.90
VFO B____________________: 24930.35
Mode_____________________: CW
AGC speed________________: FAST
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 1
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 10Hz
XFIL 1___________________: 2500
XFIL 2___________________: 700
XFIL 3___________________: 400
XFIL 4___________________: 100


Band Setting for: 10m 28MHz
---------------------------
*** Note, split working is set "per band" AND ACTIVE on this band.

VFO A (TX)_______________: 28243.38
VFO B (RX)_______________: 29156.94
Mode_____________________: LSB
AGC speed________________: FAST
AGC On/Off_______________: ON
RX Ant. selected_________: OFF
Ant. 1 or 2 selected_____: Antenna 2
Pre-amp selected_________: ON
Attenuator selected______: OFF
RIT On/Off_______________: OFF
RIT FINE On/Off__________: OFF
XIT On/Off_______________: OFF
VFO Tune Rate____________: 10Hz
XFIL 1___________________: 2500
XFIL 2___________________: 2500
XFIL 3___________________: 1800
XFIL 4___________________: 1600


Primary Menu Entries
--------------------

ST L_____________________: 002
ST P_____________________: 0.60
T-R______________________: 0.02
RPT______________________: 004
INP______________________: PDLR
IAB______________________: A
SSBA_____________________: 3
SSBC_____________________: 4-I
LCD______________________: NITE
GRPH_____________________: BAR
OPT______________________: PERF
ATU______________________: POUT
RANT_____________________: ON
CAL______________________: OFF
PF1______________________: SCAN
PF2______________________: OPT


Secondary Menu Entries
--------------------

SLCH_____________________: 0FF
RATES____________________: 3C
DOT______________________: 1.10
FPLY_____________________: 45
PORT_____________________: ON
SPLT_____________________: PER
PO28_____________________: 15.0
RTTY_____________________: ON
RTC______________________: ON
RIT______________________: 0.6
ACC______________________: --
D19______________________: N
PA_______________________: --
TRN1_____________________: OFF
TRN2_____________________: OFF
TRN3_____________________: OFF