[Elecraft] Freq probe

Mon Mar 3 12:49:01 2003

Ron -

Is this also necessary it the top cover is the KPA100?

73 de NA8M
John

----- Original Message ----- 
From: "Ron D'Eau Claire" <[email protected]>
To: "'Elecraft'" <[email protected]>
Sent: Monday, March 03, 2003 11:56 AM
Subject: RE: [Elecraft] Freq probe

> The magnet on the speaker attached to the top cover is close enough to
> the PLL Reference Oscillator to affect its frequency slightly.  So cover
> with the speaker attached needs to be in place when the system
> calibrates the oscillator.
> 
> Ron AC7AC
> K2 # 1289
> 
> -----Original Message-----
> Francis Belliveau wrote:
> > 
> > I find the need to have the top cover on interesting.  As I recall 
> > there was a note published about removing the frequency probe before 
> > buttoning up the K2?  Something about mixing or harmonics being 
> > introduced that got noticed during the early days of K100 production.
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 
> 