[Elecraft] Info 201 help please

[Frank Jonischkies]

Hi John,

> I've just got as far as the alignment and test part one on the K2.It
powers
> up OK and I get the InFO 201 message then nothing else. On repowering I
then
> get ELE. Resetting brings me back to INFO 201. Any suggestions please?

Look at page 8 in appendix E, Troubleshooting. 201 message should come up
only one time at first power up. The EEPROM must be formated. Check all
solder junction on control board. Let the EEPROM compleatly format. May be
you switched off during first format. Try reset (4+5+6 pressed on power on),
page 99.

73 de Frank, DH8JF