[Elecraft] KDSP2
Lyle Johnson
[email protected]
Wed Jul 23 12:19:00 2003
Hallo Wolf!
> The filters are very powerful, but the noisereduction in cw mode is a
> little bit strange. Sometimes the cw sounds chopping. I played with the
> parameters and set the decay to 32, this gives me a better sound.
This can happen especially with weak signals.
> One point left, the white background noise (hiss). With the KAF2 the
> hiss was much more reduced. I know the hiss comes from the IF, if I
> reduce the RF gain I can also remove the hiss.
In LPASS mode or BYPASS mode, the hiss will be present. It shouldn't be
there with other filters, though.
> It is possible for later
> revisions of the KDSP2 that the first stage (lowpass) of the KAF2 or
> something similar can be inserted on the KDSP2?
I am not sure where to fit the parts on the PC board! :-(
> Another wish is to insert the clock display in the display button cycle
> again.
This would require a change in the K2 MCU firmware.
If you leave the clock displaying from the KDSP2, then press DISPLAY, you
will find the clock in the normal DISPLAY sequence just like the KAF2. But,
to alter the DSP settings, you will have to exit the clock menu.
73,
Lyle KK7P