[Elecraft] Interchangeable Boards

Sun Jan 26 18:06:00 2003

In a message dated 1/25/2003 8:30:07 PM Eastern Standard Time, 
[email protected] writes:

> You can do the alignment by removing the ATU board and inserting a jumper
> wire in pin 1 and 9 of J2 on the filter board. Then reconnect R37 and the 
> K1
> is back to normal for adjustment and alignment

Stop the presses. I figured it out. I got confused between board versions. 
Actually, the newest board makes it possible to simply change a jumper rather 
than resoldering the resistor. As it turned out, I did not have to realign 
the board. Once I changed the jumper to ATU, it worked perfectly n the newer 
radio.

As it turned out, the R37 disconnection had never been made in the original 
radio. The ATU worked fine anyway. So now, I didn't have to put it back to 
use the radio without the ATU.

Sorry for the trouble to anyone who answered my request for help after I 
figured it out.

Jimmy Walker
WA4ILO
Macon, GA
[email protected]
<A HREF="http://members.cox.net/wa4ilo">http://members.cox.net/wa4ilo</A>

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---