[Elecraft] Info 232 when doing 160m PLL alignment

Sun Jan 26 15:48:00 2003

Hi Gregg,

Be sure the frequency counter probe is connected to TP1 and you have the rx
set to 7MHz (40mtr) when you begin the CAL PLL procedure. It will
re-calibrate all the bands in one pass.

73/ Bob - AG5Q

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Sunday, January 26, 2003 2:28 PM
Subject: [Elecraft] Info 232 when doing 160m PLL alignment

> I am getting an info  232 error when trying to do a 160m VFO
linearization.
> When I begin the process the display changes to 40 meters.
>
> Any help is appriciated. Otherwise the radio works great
> Gregg
> W6IZT
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com