[Elecraft] Interchangeable Boards

[JDWalkerJr@aol.com]

In a message dated 1/25/2003 8:30:07 PM Eastern Standard Time, 
DolfinDon@msn.com writes:

> You can do the alignment by removing the ATU board and inserting a jumper
> wire in pin 1 and 9 of J2 on the filter board. Then reconnect R37 and the 
> K1
> is back to normal for adjustment and alignment

Thank you for that response. I'm going to give it a try this afternoon.

But, do you think it makes sense to have to realign the board just because I 
switched it to another radio? It still works great in the old radio. And I 
know this new radio works great because I can get max output on 30 and 17 
meters with it.

Jimmy Walker
WA4ILO
Macon, GA
jdwalkerjr@aol.com
<A HREF="http://members.cox.net/wa4ilo">http://members.cox.net/wa4ilo</A>


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---