[Elecraft] Serial 3000+ K2: AGC threshold setting
Don Brown
[email protected]
Thu Jan 23 09:51:00 2003
----- Original Message -----
From: "Don Brown" <[email protected]>
To: "Wallace, Andy" <[email protected]>
Cc: "Wallace, Andy" <[email protected]>
Sent: Thursday, January 23, 2003 8:44 AM
Subject: Re: [Elecraft] Serial 3000+ K2: AGC threshold setting
> Hi
>
SNIP
>
> The simplest fix for this is to tack a resistor around 51K across pins 4
and
> 5 of RP6. This will raise the adjustment range and make up for the lower 8
> volt supply.
>
> Don Brown
> KD5NDB
Sorry should be pins 3 and 4 of RP6
Don Brown
KD5NDB