[Elecraft] RE: k2 Alignment not going well (resolved)

[Terry Bassett]

Hello,
=09It is resolved now. Peter Rosenberg AC7SB emailed me and mentioned the=
 RFC 15=20
mod on the errata sheet.  I checked mine out and re-heated the solder joi=
nts=20
there and re-tested and the VCO voltages are right now.
=09Many thanks Peter, somehow I had not double-checked the mod from the e=
rrata=20
sheet.=20
=09Now I am signal tracing the BFO, C174 doesnt have a signal on both sid=
es of=20
it. I am in contact with Scott at Elecraft and hope to get this radio goi=
ng=20
soon.

73 All,

Terry  KA9TXE  in East Central Illinois
=09