[Elecraft] CW Program

Sun Jan 5 17:16:32 2003

I found the trick with CWGet to copy very weak signals.  I jack straight
from the headphone output into the computer.  I set the line input level
pretty high and then just turn the K2 volume up just barely loud enough to
see any "noise" in the CWGet display.  Real "signals", even very weak
ones, are much louder (to the computer) than the noise floor of the K2.

With the volume up much more, even if compensated by turning the line
input gain down, CWGet gets much more picky about signal strength.

Hope this helps.

73 de John - K4WTF

On Sat, 4 Jan 2003, Bob - AG5Q wrote:

> I just downloaded CWGet with no problem using IE5.
> It works pretty good on strong signals.
> 
> Thanks for the link, Sherman.
> 
> 73/ Bob - AG5Q
> 
> 
> 
> ----- Original Message -----
> From: "Joseph Wiedeman" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, January 04, 2003 11:53 AM
> Subject: Re: [Elecraft] CW Program
> 
> 
> > Hi Sherman:
> > For some reason I can't  download the programs. All I get is a small box
> in
> > the top left corner with an X in it when trying.. Is this download in
> > Hipertext??or what't up.
> > K2MUF
> > > I have not tried these programs, but they are shareware.
> > > http://www.dxsoft.com/
> > > CWGet and CWType are the programs you are interested in.
> 
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 