[Elecraft] Call sign emblem for the KAT100-2?

[Ken Kaplan]

Tom:
Hi and happy new year to you (and all others Electcrafters).

On my K2, just below the S-Meter, below the yellow
ALC line, is an area large enough to have a clear area for my call.
The call isn't actually engraved into the panel, but reverse
engraved into the plexiglass. I had thought of
supplying them at one time, but couldn't
get an answer out of Eric or Wayne (I made one for each of them).

It's nice to be able to identify 'your K2'. I've been places
where we have had 2 or 3 displayed and they do look alike.

I also have a noce brass plate on the top panel (about .5 x 1 in)
That says Assembled by Ken WB2ART and the serial number (#769),
With the Elecraft logo (all done by diamond scratch).

73/2
Ken WB2ART




-----Original Message-----
From: Tom Hammond N=D8SS [mailto:n0ss@earthlink.net]=20
Sent: Thursday, January 02, 2003 5:33 PM
To: Ken Kaplan
Subject: RE: [Elecraft] Call sign emblem for the KAT100-2?

Ken:

>I can make engraved signs if you want to conract me off list
>Wb2art@arrl.net
>
>I've also reversed engraved my call on the plexiglass
>front panel.

What'd be REALLY neat would be to engrave the call directly into the
front=20
panel, then fill with enamel... probably more difficult than merely
writing=20
about it though... <G>

73,

Tom  N0SS