AW: [Elecraft] K2 s/n 3021 Display Board:

[Martin AC6RM]

Thanks Stephan and all others that answered!  To be sure, I am having a
WONDERFUL time building this radio.  Reading and following the manual I
feel like I am in a classroom listening to a careful instructor that is
looking over my shoulder with care.  I almost hate to raise my hand!

The errata that came with my radio is "Rev. D-1, Oct 27, 2002" and I can't
find a note about J1 Pin 3.  The sheet has the following notes:

1.  Resistor Substitution (note about 1/4-watt 1% resistors)
2.  Page 49, right column last step: (installation of RFC15 and C91 on the
bottom of the board)
3.  Page 54, right column, first assembly step (note about C6).

Is there anything else that should be included with my vintage?

Many thanks and 73,

Martin

> Hi Martin
>
> I'm a little further down the manual with my S/N 3128...
>
> I checked back on my measumrents and found a note in the errata-sheet
> stating that J1, Pin 3 is AF Gain3 (not ground) and should be >1M
> instead of 0.
> You may want to check with your version of the manual and the online
> doc's. My manual is Rev. D from Oct. 22, 2002 and the erratra sheet is
> Rev. D-4 from Dec. 2, 2002.
>
> Hope that helps, have as much fun as I have with mine, 73, Stephan,
> HB9DDO
> .... < snip > ...