[Elecraft] K2 s/n 3021 Display Board:

Thu Jan 2 12:08:00 2003

Did you read the errata sheet included with your radio...this was
changed on S#'s above 3000.  You have the right reading....continue with
the building.

Gregg R. Lengling, W9DHI
Camel Communications, Inc.
http://www.camelcomm.com
Politics is the art of appearing candid and completely open, while
concealing as much as possible.   -States: The Bene Gesserit View

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Martin AC6RM
Sent: Thursday, January 02, 2003 10:50 AM
To: [email protected]
Subject: [Elecraft] K2 s/n 3021 Display Board:

Hello;

   I am part-way through assembling K2 s/n 3021.  The resistance checks
detailed on page 27 of the manual all checked out okay except for J1
pin 3.  This is supposed to be ground, but I get a high impedance
(>1M).

   I continued on with construction despite the failure and all tests
shown on pages 41 through 46 passed.

   Any ideas?  Seems a ground connection would be a trace issue (or
maybe
a diode issue -- I double-checked the polarity on all my diodes). 
There is conductivity through the connector itself, just not to ground.
 What did I do wrong?

   Thanks ES 73,

   Martin

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. 
Postings must be plain text (no HTML or attachments). 
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com