[Elecraft] RP3 Front Panel Parts Subsitution?

[Don Brown]

Hi

Yes for that type but there two types of RP used in the K2/K1 one has a
resistor on each two pins down the row and all of the resistors are isolated
from each other the other type has pin 1 common to all of the resistors. So
a 10 pin resistor pack could have 5 independent resistors or 9 resistors
with pin 1 common.

Don Brown
KD5NDB


----- Original Message -----
From: "Carl J. Denbow" <n8vz@fptoday.com>
To: <wa7gxd@fidalgo.net>; "Reflector Elecraft" <Elecraft@mailman.qth.net>
Sent: Wednesday, January 01, 2003 5:56 PM
Subject: RE: [Elecraft] RP3 Front Panel Parts Subsitution?


Thanks, Lyle.  I checked and between every pair of pins is 10K +/- a
few ohms.  I guess that must be how RPs work! ;-)
: http://www.elecraft.com