[Elecraft] Re: All PLL reference oscillator questions answered(Except for 1!)

[Wayne Burdick]

It will actually work with as little as 9.1 kHz of range, Brendan. We use 9.8
kHz to provide a safety margin.

Sounds like you don't need to change anything.

73,
Wayne


Brendan Minish wrote:
> 
> At 10:02 27/02/2003 -0800, Wayne Burdick wrote:
> 
> >- A PLL reference oscillator range of 11 kHz is plenty. The present K2 manual,
> >on page 57, specifies a minimum range of 9.8 kHz.
> 
> My PLL only covers 12091.08 Khz to 12100.64 Khz (a Range of a little over
> 9.5 Khz )
> During normal Dial tuning the following range is used
> 12095.02 to 12100.08
> 
> there is no 'gaps' in the tuning range and other than the glitch when
> crossing 5 Khz boundaries there are no other problems at the boundary
> points such as pitch jumps etc.
> 
> Am I ok with this range or should I put back the other xtal ?
> 
> 73
> Brendan EI6IZ

-- 

http://www.elecraft.com