[Elecraft] No K3 in the near future.

Wed Feb 26 10:03:00 2003

>  Sam Smith wrote:
>
>  How about an embedded web server? An internet-ready K2, with streaming
>  audio?
>
>Thom replied:
> > But then the problem will be:
> > Should it be M$ or *nix based?
> >

Embedded systems do not have to be either flavour. My personal favorite
controller, which includeds an integral ethernet controller, IP stack,
source for DIY Web server, telnet, ftp server etc is the Rabbit series. I
work with them a lot. At home I use one as an auto-tuner for my mag loops.

One day (when I've finished the K2 Dump & Save) I'll connect up a rabbit to
the K2 as a web server for remote operation, and add screaming audio.

For who want to progress beyone the Basic & Javelin Stamps see:

www.rabbitsemiconductor.com

Regards,

Tony M3CJF
G7IGG
All mail in and out checked lovingly by hand, character by character.

----- Original Message -----
From: "Martin AC6RM" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Wednesday, February 26, 2003 2:18 PM
Subject: Re: [Elecraft] No K3 in the near future.

> Actually, the notion of an embedded IP stack on the K1/K2 is not as
> rediculous as it might sound.  One of those interesting auxbus projects.
> Note the web interface on your linksys or netgear router ...
> 73, Martin AC6RM
>
> > Thom
> >
> > [email protected]             Thom LaCosta K3HRN Webmaster
> > http://www.baltimoremd.com/             Baltimore's Home Page
> > http://www.baltimorehon.com/            Home of the Baltimore Lexicon
> > http://www.zerobeat.net                 Home of The QRP Web Ring and
> > DrakeList http://www.tlchost.net                  Web Hosting as low as
> > $3.49/month
> >
> > _______________________________________________
> > Elecraft mailing list: [email protected]
> > You must be a list member to post to the list.
> > Postings must be plain text (no HTML or attachments).
> > See: http://mailman.qth.net/mailman/listinfo/elecraft
> > Elecraft Web Page: http://www.elecraft.com
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>