[Elecraft] K2 has 0.1W out on all bands, no higher

[Daniel L Brinneman]

Hi Rich,

I sure it is not a problem with Q6 shorting to GND, because 13v PWR SPPLY
is present on the center lead on receive but it disappears when on
transmit.

Daniel
kg4dni
======================
On Sun, 23 Feb 2003 20:35:05 -0600 Richard  Lim <richlim11@yahoo.com>
writes:
> Hi Dan, I was thinking that without the thermal pad to insulate Q6 
> from the
> case, you may be shorting the transistor to ground, just a thought 
> as I'm
> not sure on this.  Also, if you remember, I had the same problem and 
> I found
> that I switched TWO wires from T3.  This was hard to find as the 
> wires are


________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com