[Elecraft] K1 - Front panel board - orphaned resistors

Mon Feb 17 15:29:00 2003

Look at page 22.  R9 is 220 ohms and R 14 is 100K.  They are installed
with other resistors listed on that page.  According to the inventory,
there is only one each of those values.  So check to see if you have
installed R9 and R14 and, if there are resistors installed at those
places on the board, that they are of the correct value.

Bruce - W8FU

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bozidar Benc
Sent: Monday, February 17, 2003 2:31 AM
To: [email protected]
Subject: [Elecraft] K1 - Front panel board - orphaned resistors

Hi,

I finished tonight the front panel board. Followed instructions step by
step, checking everything at least twice, and now I have two unused
resistors, 100k and 220 ohms. All resistors except those two were packed
together in the installation order.

I checked the board and I was not able to find any empty space for
soldering
those resistors.

There are several 100k resistors on the FP board schematic, but I
couldn't
find 220 ohm. Are those two resistors just a gift from Elecraft? :-)

Any idea what I missed?

73, Bole, 9A3RR

_______________________________________________
Elecraft mailing list: [email protected]
You must be a list member to post to the list. 
Postings must be plain text (no HTML or attachments). 
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com