[Elecraft] Stealthy Antenna and W1CG Balun

[WB4X (Brent Sutphin)]

I also just finished the W1CG Low Power Balun.  I mounted the balun =
inside my K2 and use banana plugs mounted on the rear panel. (in the =
holes for transverter connections) This made for a very nice setup.  =
Internal connections were made using a short piece of RG-174 from the =
antenna 2 jack on the KAT2 PCB to the balun.  The antenna is a 60 ft =
doublet, center fed with 300 ohm twin lead, installed in my attic.  So =
far the antenna seems to work very well.

73=20
Brent 

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---