[Elecraft] Parts ID, trimmers C21,23,32,34,44,46- K2 RF board

Tue Dec 30 02:19:01 2003

It turns out, I could fairly easily measure them, at least enough to
tell a 30pf from a 50pf.  And I'd have been OK taking the physical
characteristics as an indicator.

73, doug

   From: "Bob Tellefsen" <[email protected]>
   Date: Mon, 29 Dec 2003 21:46:03 -0800

   Doug
   With parts that will go into a radio you care about,
   measure them and know what you have.
   Good luck and 73
   Bob N6WG

   -----Original Message-----
   From: [email protected]
   [mailto:[email protected]]On Behalf Of Doug Faunt N6TQS
   +1-510-655-8604
   Sent: Monday, December 29, 2003 6:03 PM
   To: [email protected]
   Subject: [Elecraft] Parts ID, trimmers C21,23,32,34,44,46- K2 RF board

   Hi all,

   I'm back working on my A with board upgrade to B K2, and have a
   question about parts ID.  These trimmers are almost identical.  They
   may have been in a separate bag, but aren't anymore, and don't really
   have any marks on them.  However, 4 of them are a slightly different
   color from the other two, and have slightly different amounts of solder
   as manufactured.  Are these significant enough differences, or should
   I try to find a way to measure them?

   73, doug

   _______________________________________________
   Elecraft mailing list: [email protected]
   You must be subscribed to post to the list.
   To subscribe or unsubscribe see:
   http://mailman.qth.net/mailman/listinfo/elecraft
   Elecraft Web Page: http://www.elecraft.com
   Also see: http://www.elecraft.com/elecraft_list_guidelines.htm