[Elecraft] Front Panel Board (SSB Modif.) Clarification

[Sverre Holm]

These are two different series of capacitors. The capacitor numbering
starts from C1 on each separate board:

> trying to figure this out: 1. In the K2 manual, it says that 
> C4-C8 are all .01 (103) capacitors. 
These are for the front panel board.

> But in the SSB adaptor 
> manual, it says on page 2 that C4 is a 104 and the C5-C8 are 
> 103 capacitors. But on the next page (page 3), 
These are for the KSB2 board

> it does not 
> give a reading (other than .01 uF, 0.2".). I am VERY VERY confused. 
... and then these are for the KSB2 board again.


--
73, 
Sverre

------------------
Sverre Holm, LA3ZA
www.qsl.net/la3za