[Elecraft] Two K2's for split operation

Sat Dec 20 12:03:01 2003

Hello Carl,

Very glad to hear that you are working with the Elecraft K2.  Count me in 
<g>.

The K2 Computer Control program on the Elecraft site works fine (I use it 
almost every day), the K2 commands are robust.  Eric Swartz of Elecraft 
should be very helpful.

I would like to:

Control two (2) K2s with your software.
Use my Ten-Tec RX-340 as a second receiver with a K2 and your software.
Use the KRC2 Band Decoder with your software (click functions).
Use your screen to read the K2 freq and the RX-340/HP-Z3801A GPS unit for 
sub Hz readout.

73, Harry W8YMO Cleveland, OH

----- Original Message ----- 
From: "Carl Moreschi" <[email protected]>
To: <[email protected]>
Sent: Saturday, December 20, 2003 8:54 AM
Subject: Re: [Elecraft] Two K2's for split operation

> I am in the process of converting my N4PY Pegasus control program so it 
> will
> work with the K2.  This will allow the tentec rx320 to be used as a
> subreceiver with the K2.  This will give the K2 full dual receive split
> operation.  I am anticipating this addition to my software to be ready
> sometime time in January.  See my webpage at www.n4py.com to get an idea 
> of
> the new function my program will give the K2.  Most functions that can be
> done with the tentec pegasus will be able to be done using my N4PY 
> software
> and the K2.
>
> Carl Moreschi N4PY
> Franklinton, NC
> ----- Original Message -----
> From: "Karsten Koch" <[email protected]>
> To: <[email protected]>
> Cc: <[email protected]>
> Sent: Saturday, December 20, 2003 12:13 PM
> Subject: [Elecraft] Two K2's for split operation 