[Elecraft] K2DSP and audio output

[Wolf-Ruediger Juergens]

Hello,
In a older posting Lyle, KK7P suggested the use of pin4 or pin5 from J2
on the KDSP, via 1uF as high level independent audio output. Today I
made this modification and it works very well. Plenty of audio, so I can
use the line input now instead of the microphone input from my
Soundblaster Audigy. The advantage of using the line input is that you
have less more noise than via microphone input. Very important if you
try to detect not audible signals, like QRSS or DFCW.

72 de Wolf, DL2WRJ
-- 
http://www.dl2wrj.de