[Elecraft] Remoting the k2 key

[John Cooper]

Ok WT5Y here,  just finished reading the Jan 2004 QST article on =
remoting the key for a radio using a parallax tx/rcvr on 433mhz.  Its =
pages 36-37 by the way.  Looks simple enough not many parts the only =
real problem I could see was that the key line has to be 5V as any more =
voltage will quickly fry it according to the pdf file on their =
webpage(www.paralax.com).  I looked in the K2 manual found the dot/dash =
pins in the schematic 28 and 29 on U6 on the control board and according =
to the Voltage Tables in the back I have 5V.  So I think this will work. =
=20

Their a lil pricey 60$ for one module and 30$ for the other so I just =
wanna double check this will work

Thanks WT5Y

73

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---