[Elecraft] K2 transmit current

Fri Aug 15 06:43:04 2003

Doesn't seem that far off to me. How were you measuring the power out?

KAC

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Charles Vollum
Sent: Friday, August 15, 2003 1:48 AM
To: [email protected]
Subject: [Elecraft] K2 transmit current

Hi gang,

I'm finishing up K2 #3632.  All seems FB except that the current draw 
in transmit is a bit high, about 2.2 amps at 10w as opposed to the 
1.8-2.0 stated in the manual.  On receive, about 240 ma.  Is this 
something I should be tracking down before I button up, or is 10% over 
just a normal variation?

73,  Charles  N7BPT
----
Charles Vollum
http://xsw.com/boojum -- Boojum, a trailerable offshore tug yacht

_______________________________________________
Elecraft mailing list: [email protected]
You must be subscribed to post to the list.
To subscribe or unsubscribe see: http://mailman.qth.net/mailman/listinfo/elecraft
Postings must be plain text (no HTML or attachments). 
Elecraft Web Page: http://www.elecraft.com